B-Line now manufactures its existing Type 4X JIC Stainless Steel Lift-Off Cover, Continuous Hinge Cover, Single-Door and Double-Door Floor-Standing Enclosures in Type 316L Stainless Steel.

Application:

• Houses electrical controls and instruments.
• Intended for indoor or outdoor use where a corrosive environment exists.
• Protects against corrosion, windblown dust and rain, splashing water and hose directed water.

Standards:

• UL 508 Listed, Type 4X, Type 4, Type 13 and Type 12
• CSA C22.2 No. 94 certified, Type 4X, Type 4, Type 13 and Type 12
• Conforms to NEMA standard for Type 4X, Type 4, Type 13 and Type 12
• Conforms to JIC standard EGP-1-1967

Finish:

• Outer surface of enclosure and cover have a smooth brushed finish.

Type 4X JIC Lift-Off Cover Enclosures

Construction:

• Enclosure and door are fabricated from (14) gauge, Type 316L stainless steel.
• All continuous welded seams are finished smooth.
• Cover is secured to the body with easy-to-operate stainless steel screw clamps mounted on all four sides.
• Cover has a fixed, oil and water-resistant gasket.
• #10-32 weldnuts are provided for mounting optional panel on 6H x 4W and larger enclosures.
• External mounting feet are provided for secure wall mounting.
• Nine (9) sizes available.

Type 4X JIC Continuous Hinge Cover Enclosures

Construction:

• Enclosure and cover are fabricated from (14) gauge, Type 316L stainless steel.
• All continuous welded seams are finished smooth.
• Cover is secured to body with a stainless steel continuous hinge and pin on one side and easy-to-operate stainless steel screw clamps mounted to the opposite side.
• Cover has a fixed, oil and water-resistant gasket.
• #10-32 weldnuts are provided for mounting optional panel.
• External mounting feet are provided for secure wall mounting.
• Eight (8) sizes available.

Type 4X Single-Door Enclosures

Construction:

• Enclosure and cover are fabricated from (14) gauge, Type 316L stainless steel.
• All continuous welded seams are finished smooth.
• Doors are secured to the body with a heavy-duty, stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides.
• Each door has a print pocket and padlock hasp with sealing hole provision.
• Door has a fixed, oil and water-resistant gasket.
• .375-16 collar studs are provided for mounting optional panel.
• External mounting feet are provided for secure wall mounting.
• Forty-eight (48) sizes available.

Type 4X Double-Door Floor-Standing Enclosures

Construction:

• Enclosure and cover are fabricated from (12) gauge, Type 316L stainless steel.
• All continuous welded seams are finished smooth.
• Doors are secured to the body with a heavy-duty, stainless steel continuous hinge and pin on one side and easy-to-release stainless steel door clamps mounted to the other three sides.
• Right side door has a print pocket.
• Each door has a padlock hasp with sealing hole provision.
• Doors have a fixed, oil and water-resistant gasket.
• Removable center post for complete front access.
• Heavy gauge angle supports and .375-16 collar studs are provided for mounting optional panel.
• Large lifting eyebolts are supplied.
• Mounting legs are provided for floor mounting.
• Five (5) sizes available.

Download Product Sheet